This is an old revision of the document!
Table of Contents
Sysop
The sysop (System Operator) is the administrator that runs the BBS, and they have unlimited access and control over their instance of Synchronet and its users. When networked with other systems (e.g., DOVE-Net, FidoNet, inter-BBS chat), they are often considered responsible for any traffic originating from their system, including misconfigurations and any of their users' poor behavior.
There is usually one sysop per BBS, though Synchronet can be configured for multiple sysops (sometimes called co-sysops). In Synchronet, any user with a security level at or above 90 is considered a sysop.
Depending on the “Require Sys Pass During Login” in SCFG System Configuration under Toggle Options, the sysop will either be required to enter the system password at login or when performing a sysop-level function. Synchronet will prompt with SY: when asking for the system password.
Multiple Sysops / Co-Sysops
Multiple levels of sysop access (90-99) can be used to restrict some areas (i.e., message groups, sub-boards, file libraries, etc.) by setting the minimum required level of that area higher than the sysop's security level.
Any user with a security level at or above 90 can perform sysop functions, including ;SHELL access with the same OS permissions as the OS user that the BBS runs as.
Using the in-BBS ;UEDIT user editor, a sysop with security level at or above 90 cannot edit a sysop with a higher security level. ;SHELL can potentially give access to the useredit application that allows full user editing privileges, however.
Users with sysop access can cause damage to the BBS, as well as compromise the underlying operating system. Give out sysop-level access with caution.
Sysop Commands
A menu of the available commands can be viewed with the '!' command from the main or transfer sections with the Synchronet Classic command shell. Additional sysop commands are available in many other sections of the BBS and are displayed after the normal menu with the '?' command. All sysop commands from the main or transfer sections of the Synchronet Classic command shell begin with a semicolon (';') character, end with CR (ENTER), and some have optional parameters (shown in square brackets). Users with certain exemptions can use some of these commands and have access to the menus via the '!' command using the Synchronet Classic command shell.
Note: The Baja source code file for these commands is: exec/str_cmds.src
Usage
- All commands are preceded by a
; <>required parameter[]optional parameter()required exemption
Commands for All Users
| Command | Name | Description |
|---|---|---|
| HELP | Display available string commands | List the string commands available to the user along with short descriptions. |
| FIND [word] | Find a message area or file area | Returns a list of message areas or file areas matching the search term. Search [word] can be part of a word, a full word, or a phrase. The command will search message areas if run from the main menu, or will search file areas if run from the file menu. |
| MSGS | Redisplay messages | Redisplay instant messages (notifications and telegrams) that the user previously received. |
| PLAN | Edit .plan file | Edits or deletes your .plan file (displayed when somebody Fingers you). |
| POFF | Pager off | Toggles if other users can page you during this session for a multinode chat. |
User & Mail Management
| Command | Name | Description |
|---|---|---|
| UEDIT [user number or name] | User editor | Starts the User Edit function, allowing the sysop to edit or delete/restore users. If a [user] is specified it will be the current user when User Edit starts.  add link when user editor page is created |
| BULKMAIL | Send mass mail | Sends an email to all users that match a specified Access Requirements String (“ARS”). |
| CHUSER | Change to another user | Allows the sysop to temporarily change to another user account. If changing to an account with a higher level, the password of that user must be given. Changing to a user of non-sysop status automatically enables Temp Sysop mode so that the sysop can change back to their own account before logging off (a suggested action). |
| Read all mail | Read all the email in the mail base, regardless of recipient. |
Node Control
| Command | Name | Description |
|---|---|---|
| NODE [parameters] | Node utility | Executes the node utility with the passed parameters. |
 DOWN [#] | Down node | Toggles the down status of a node. When a node has the down status (noted by the [D] flag on the node status line) it will be shut down immediately after the user logs off. If a user is not online, it will shut down immediately. If a node [#] is not specified, the current node will be shut down. To go back to a “Waiting for Connection” status, use ;NODE STATUS=0 [node #]. ←- Unsure of this. Still holds a [D] status until toggled off. |
| INTR [#] | Interrupt node | Disconnect a user as soon as it is safe to do so, displaying a “closed for maintenance” message. If the user is currently executing an external program (including editors and transfer protocols), they will be disconnected as soon as control returns to Synchronet. If [#] is specified, that node's interrupt status will be toggled, otherwise the current node will be interrupted. The current interrupt status of a node is reflected by an [I] in the node listings. |
| LOCK [#] | Lock node | Prevent users from logging onto a node, giving a “down for maintenance” message. If [#] is specified, that node's lock status will be toggled. Sysops and users with the L exemption can still login. A locked node will have an (L) in the node listings. |
| RERUN [#] | Rerun node | Toggles the rerun status of a node, ←- What is rerun? If there is a user on the node, it will not rerun until that user logs off. A node that is going to be rerun is noted with an [R] in the node listing. |
| SPY [#] | Spy on a node | Allows the sysop to remotely monitor or control another node. |
Logging & Stats
| Command | Name | Description |
|---|---|---|
| ERR | Critical error log | View the error log and optionally delete it, as well as optionally clearing all nodes' error counters. |
| LOG | Today's log | View today's detailed node log file. |
| YLOG | Yesterday's log | View yesterday's detailed node log file. |
| NLOG [#] | Node statistics log | View the historical, daily statistics for a single node. Statistics for the current node will be shown unless a node [#] is specified. |
| NS [#] | Node statistics | Today's statistics for single node. The node [#] will be prompted for if it is not provided. |
| SLOG | System statistics log | View the historical, daily statistics for the system (sum of all nodes). |
| SS | System statistics | Today's combined statistics for all nodes. |
Node & Sysop Display
| Command | Name | Description |
|---|---|---|
| ANON | Toggle anonymous mode | Makes the current node anonymous, where the node is listed as online but the user is not. Sysops and users with the Q exemption have access to this command. To a sysop, an anonymous node appears normal with the addition of an [A] in the node information line. |
| AVAIL | Toggle sysop chat availability | |
| QUIET | Quiet mode | Using this command, a sysop (or user with the Q exemption) can make their node appear to be “Waiting for call” to other users of the system. To a sysop, a node in this state appears normal, with the addition of a [Q] in the node information line. |
OS & Files
| Command | Name | Description |
|---|---|---|
| EXEC [command] | Execute a command with I/O redirected | Execute internal DOS commands (DIR, TYPE, etc.) by prepending “command /c” to your command line. Execute Baja modules by prepending “*” to the command line. Baja modules must be located in your EXEC directory. Command line specifiers (see appendix A) may be used. |
| FOSSIL [command] | Execute FOSSIL driver command | |
| NEXEC [command] | Execute native binary with I/O redirected | |
| GET [path] | Download file | Download a file from any directory on the system. The file does not have to be in the file database. |
| PUT [path] | Upload file | Upload a file to the system without having to add it to the file database. |
| DIR [path] | List files | Displays a directory listing of the path specified. If no path is specified, a list of the current file transfer area is displayed. |
| TYPE [filename] | View text/msg file | View any ASCII text or MSG format file on the system, starting from the ctrl/ directory. Aliases CAT or LIST also invoke this command. If the [filename] is not specified, it is prompted for. |
| EDIT [filename] | File editor | Edit any ASCII text or MSG format files on the system using your message editor. If [filename] is given it will be opened, or it will be created if it doesn't exist. If [filename] is not specified, the filename will be prompted for. |
| DOS | DOS command shell | Go to the DOS command line with I/O redirected. |
| SHELL | OS command shell | Executes the native shell (COMSPEC or SHELL env variable. |
Miscellaneous
| Command | Name | Description |
|---|---|---|
| CALL <Hub-ID> | Force QWKnet callout | Forces a QWKnet callout to the <Hub-ID>. Example: CALL VERT |
| CHAT | Page sysop | Users with the C exemption can use this command to page the sysop for chat. ←- still required? |
| ECHO [string] | Print a text message | Prints a string, including Message Variables (@-codes). |
| EVAL [str] | Evaluate JavaScript | Evaluate a JavaScript expression and display the result. |
| EVENT [EventID] | Execute event | Forces a timed event to execute via semfile. |
| GURU | Guru log | Display and optionally clear the GURU.LOG file that contains user discussions with the system guru (GURU.DAT). |
| LOAD [filespec] | Load filespec | Loads the text.dat from the specified filespec. |
