This is an old revision of the document!
Table of Contents
Install Synchronet on a Raspberry Pi
Here are step-by-step instructions on building and installing Synchronet on a Raspberry Pi running either Raspbian or Raspberry Pi OS 32-bit.
Note: While Raspbian and the 32-bit version of Raspberry Pi OS are virtually identical, the 64-bit version of Raspberry Pi OS is a significant departure from Raspbian. These instructions are untested on the 64-bit version.
Prerequisites
These instructions were created using a Raspberry Pi 3 Model B running Raspbian Stretch, kernel version 4.4:
$ uname -a Linux raspberrypi 4.4.21-v7+ #911 SMP Thu Sep 15 14:22:38 BST 2016 armv7l GNU/Linux
These instructions have recently been confirmed using a Raspberry Pi 3 Model B running Raspbian Stretch Light, kernel version 4.14:
$ uname -a Linux raspberrypi 4.14.71-v7+ #1145 SMP Fri Sep 21 15:38:35 BST 2018 armv7l GNU/Linux
These instructions have recently been confirmed using a Raspberry Pi 4 running Raspberry Pi OS, kernel version 6.1.0:
$ uname -a Linux raspberrypi 6.1.0-rpi7-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24) aarch64 GNU/Linux
Instructions
Get to a Terminal/command prompt (e.g. login via SSH or run the Terminal application from the PIXEL desktop).
Login as your preferred user account to run the BBS software (e.g. the default user pi, or create the user sbbs using the Linux adduser utility and then run su sbbs to login as the user sbbs).
These instructions install Synchronet (source code, executables, configuration, and data files) into a sub-directory named sbbs off of the home directory of the current user (e.g. ~/sbbs). So if the current user is “pi”, that would expand to /home/pi/sbbs. If you wish to install into a different directory (e.g. /sbbs instead of ~/sbbs), then change the following commands as you see fit, but that is not recommended.
Install all the prerequisites for Debian/Ubuntu for version 23.00 upwards then follow the instructions below: Note: If using an Rpi4 use a 64 bit Raspberry Pi OS and download arm64 instead of armhf.
| # | Command | Description |
|---|---|---|
| 1 | mkdir ~/deb_packages | Create a directory to store some packages for manual installation |
| 2 | cd ~/deb_packages | Change the current working directory to the newly-created directory |
| 3 | wget http://archive.debian.org/debian/pool/main/libf/libffi/libffi6_3.2.1-6_armhf.deb or wget http://archive.debian.org/debian/pool/main/libf/libffi/libffi6_3.2.1-6_arm64.deb | Download libffi6 |
| 4 | wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-1.0_1.8.5-1.0.0+dfsg-6_armhf.deb or | Download libmozjs185-1.0 |
| 5 | wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-dev_1.8.5-1.0.0+dfsg-6_armhf.deb or | Download libmozjs185-dev |
| 6 | sudo apt install ./lib*.deb | Install libs and dependencies |
| 7 | mkdir ~/sbbs | Create the directory where Synchronet will be built and run from |
| 8 | cd ~/sbbs | Change the current working directory to the newly-created directory |
| 9 | wget https://gitlab.synchro.net/sbbs/sbbs/-/raw/master/install/GNUmakefile | Fetch makefile |
| 10 | make install SYMLINK=1 JSINCLUDE=/usr/include/js JSLIB=mozjs185 | Build it (will likely take quite a while) |
| 11 | export SBBSCTRL=~/sbbs/ctrl | See env for details on setting this environment variable persistently |
| 12 | ~/sbbs/exec/scfg | Configure your BBS, see sbbs.ini for more Synchronet server settings |
Now you are ready to either run sbbs with interactive sysop console:
$ ~/sbbs/exec/sbbs
or see this how-to for instructions on how to run sbbs as a daemon using systemd.
Note:
This will create 32-bit ARM binaries (executables):
$ file -L sbbs sbbs: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 3.2.0
Although it is possible to create 64-bit ARM binaries for the Raspberry Pi 3/3+ through cross-compilation, this is not supported by the Raspberry Pi foundation and thus not covered here.
