Differences

This shows you the differences between two versions of the page.

--- howto:raspbian_install [2021/05/18 21:04] – [Instructions] remove zip and sudo, add libarchive-dev to instructions digital man
+++ howto:raspbian_install [2024/10/11 22:16] (current) – Installation make command-line updated to reflect new makefile name and default target digital man
@@ Line 1: / Line 1: @@
-====== Install Synchronet on a Raspberry Pi (Raspian) ======
+====== Install Synchronet on a Raspberry Pi ======
-Here are step-by-step instructions on building and installing Synchronet on a [[http://www.raspbian.org/|Raspbian]] computer ([[http://www.raspberrypi.org|Raspberry Pi]] running [[http://www.debian.org/|Debian]] Linux OS).
+Here are step-by-step instructions on building and installing Synchronet on a [[http://www.raspberrypi.org|Raspberry Pi]] running either [[http://www.raspbian.org/|Raspbian]] or [[https://www.raspberrypi.com/software/|Raspberry Pi OS 32-bit]].
+**Note:** While Raspbian and the 32-bit version of Raspberry Pi OS are virtually identical, the 64-bit version of Raspberry Pi OS is a significant departure from Raspbian. These instructions are untested on the 64-bit version.
 {{:howto:rpi.png?100|}}
@@ Line 16: / Line 18: @@
   Linux raspberrypi 4.14.71-v7+ #1145 SMP Fri Sep 21 15:38:35 BST 2018 armv7l GNU/Linux
+These instructions have recently been confirmed using a Raspberry Pi 4 running Raspberry Pi OS, kernel version 6.1.0:
+  $ uname -a
+  Linux raspberrypi 6.1.0-rpi7-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24) aarch64 GNU/Linux
 ===== Instructions =====
@@ Line 24: / Line 29: @@
 These instructions install Synchronet (source code, executables, configuration, and data files) into a sub-directory named ''sbbs'' off of the home directory of the current user (e.g. ''~/sbbs''). So if the current user is "pi", that would expand to ''/home/pi/sbbs''. If you wish to install into a different directory (e.g. ''/sbbs'' instead of ''~/sbbs''), then change the following commands as you see fit, but that is not recommended.
-Type each of these commands (see [[install:nix:prerequisites]] for a complete list of dependencies):
+Install all the [[install:nix:prerequisites]] for Debian/Ubuntu for version 23.00 upwards then follow the instructions below:
+**Note: If using an Rpi4 use a 64 bit Raspberry Pi OS and download arm64 instead of armhf.**
 ^ # ^ Command                                  ^ Description ^
-| 1 |''sudo apt-get update''                   | Resynchronize your Debian package index |
+| 1 | mkdir ~/deb_packages                 | Create a directory to store some packages for manual installation |
-| 2 | ''sudo apt-get install git''             | Install the [[dev:Git]] tools |
+| 2 | cd ~/deb_packages                    | Change the current working directory to the newly-created directory |
-| 3 | ''sudo apt-get install libnspr4-dev''    | Install the Netscape Portable Runtime library (used by Mozilla stuff) |
+| 3 | wget http://archive.debian.org/debian/pool/main/libf/libffi/libffi6_3.2.1-6_armhf.deb or \\ wget http://archive.debian.org/debian/pool/main/libf/libffi/libffi6_3.2.1-6_arm64.deb | Download libffi6 |
-| 4 | ''sudo apt-get install libmozjs185-dev'' | Install the Mozilla JavaScript development package |
+| 4 | ''wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-1.0_1.8.5-1.0.0+dfsg-6_armhf.deb or\\ wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-1.0_1.8.5-1.0.0+dfsg-6_arm64.deb'' | Download libmozjs185-1.0 |
-| 5 | ''sudo apt-get install libncursesw5-dev'' | Install the curses development package (wide char variant) |
+| 5 | ''wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-dev_1.8.5-1.0.0+dfsg-6_armhf.deb or\\ wget http://archive.debian.org/debian/pool/main/m/mozjs/libmozjs185-dev_1.8.5-1.0.0+dfsg-6_arm64.deb'' | Download libmozjs185-dev |
-| 6 | ''sudo apt-get install libarchive-dev''  | Install the libarchive development package |
+| 6 | ''sudo apt install ./lib*.deb'' | Install libs and dependencies|
 | 7 | ''mkdir ~/sbbs''                         | Create the directory where Synchronet will be built and run from |
 | 8 | ''cd ~/sbbs''                            | Change the current working directory to the newly-created directory |
-| 9 | ''wget [[https://gitlab.synchro.net/sbbs/sbbs/-/raw/master/install/GNUmakefile]]'' | [[install:nix:Fetch makefile]] |
+| 9 | ''wget [[https://gitlab.synchro.net/sbbs/sbbs/-/raw/master/install/install-sbbs.mk]]'' | [[install:nix:Fetch makefile]] |
-|10 | ''make install SYMLINK=1 JSINCLUDE=/usr/include/js JSLIB=mozjs185'' | Build it (will likely take quite a while) |
+|10 | ''make -f install-sbbs.mk SYMLINK=1 JSINCLUDE=/usr/include/js JSLIB=mozjs185'' | Build it (will likely take quite a while) |
 |11 | ''export SBBSCTRL=~/sbbs/ctrl''          | See [[config:env]] for details on setting this environment variable persistently |
 |12 | ''~/sbbs/exec/[[util:scfg]]''            | Configure your BBS, see ''[[config:sbbs.ini]]'' for more Synchronet server settings |
@@ Line 52: / Line 57: @@
 Although it [[https://www.tal.org/tutorials/raspberry-pi3-build-64-bit-kernel|is possible]] to create 64-bit ARM binaries for the Raspberry Pi 3/3+ through cross-compilation, this is not supported by the Raspberry Pi foundation and thus not covered here.
+====== DOSEMU On Raspberry Pi 4 with 64 Bit OS ======
+You will need to add the DosEMU2 Launchpad PPA to your system.
+First, add the public key
+  $ sudo curl -sS 'https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xebe1b5ded2ad45d6'|gpg --dearmor > /etc/apt/trusted.gpg.d/ubuntu-dosemu2-ppa.gpg
+This step seems to be a challenge for some people so you may have to break it into a couple of steps
+  $   curl -sS 'https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xebe1b5ded2ad45d6' | gpg --dearmor > /tmp/dosemupgp.txt
+  $   sudo mv /tmp/dosemupgp.txt /etc/apt/trusted.gpg.d/ubuntu-dosemu2-ppa.gpg
+Second, create a source file
+  $ sudo echo "deb https://ppa.launchpadcontent.net/dosemu2/ppa/ubuntu kinetic main" > /etc/apt/sources.list.d/dosemu2
+Next, run apt update to make sure there are no issues
+  $ sudo apt update
+Then install the DosEMU2 files
+  $ apt install dosemu2
+A number of packages will be installed.
+Finally, download Nelgin's dosemu2 configurations. Untar the file and follow the readme. You should be left with a working DosEMU
+ $ wget https://www.endofthelinebbs.com/dosemu2.tar.gz
+ $ tar xf dosemu2.tar.gz
 ===== See Also =====

Trace:

Differences

Navigation

Search

Toolbox