Synchronet v3.19b-Win32 (install) has been released (Jan-2022).

You can donate to the Synchronet project using PayPal.

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
howto:binkd [2010/02/25 00:50] – Links to network:usenset changed to network:usenet digitalmanhowto:binkd [2021/01/17 22:34] (current) – [SBBSecho] add fixme for old sbbsecho settings ragnarok
Line 1: Line 1:
 ====== Use BinkD with Synchronet and SBBSecho ====== ====== Use BinkD with Synchronet and SBBSecho ======
  
-FIXME+Instructions on using BinkD (FidoNet/TCP/IP mailer) with Synchronet and SBBSecho by [[person:Deuce]]. 
 + 
 +===== Variables ===== 
 + 
 +Ok, let's just run through them then... I'll use the following: 
 + 
 +^Variable  ^Purpose ^ 
 +|bP        |Your binkd path (Mine is ''/usr/bbs/sbbs/fido'') | 
 +|sP        |Synchronet installation directory (e.g. ''/usr/bbs/sbbs'') | 
 +|fZ        |your Fidonet Zone (1 for north america) | 
 +|fA        |Your complete fidonet address (ie: 1:140/17) 
 +|SysN      |your BBS name (e.g. FreeBSD Synchronet) | 
 +|SL        |Your BBS location (e.g. Yorkton, Sk) | 
 +|SN        |Sysop name (e.g. Stephen Hurd)  | 
 +|HfA       |Your hub's FidoNet address (e.g. 1:140/1) | 
 +|HiA       |Your hub's internet address | 
 +|PASS      |The password for the hub | 
 + 
 +Note, IONs are listed as 300bps in the nodeinfo. 
 + 
 +===== binkd.cfg ===== 
 + 
 +The BinkD configuration file (a.k.a. ''binkd.conf''). 
 + 
 +<file binkd.cfg> 
 +domain fidonet bP/outbound fZ 
 +domain fido alias-for fidonet 
 +domain fidonet.org alias-for fidonet 
 +address fA@fidonet 
 +sysname "SysN" 
 +location "SL" 
 +sysop "SN" 
 +nodeinfo 300,TCP,BINKP 
 +connect-timeout 60 
 +try 10 
 +hold 600 
 +send-if-pwd 
 +log bP/binkd.log 
 +loglevel 4 
 +percents 
 +printq 
 +backresolv 
 +inbound bP/inbsecure 
 +inbound-nonsecure bP/inbound   
 +temp-inbound bP/incomplete 
 +minfree 2048 
 +minfree-nonsecure 2048 
 +kill-dup-partial-files 
 +kill-old-partial-files 86400 
 +kill-old-bsy 43200 
 +flag /usr/bbs/sbbs/data/fidoin.now *.pkt *.PKT 
 +flag /usr/bbs/sbbs/data/fidoin.now *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa? *.SU? *.MO? *.TU? *.WE? *.TH? *.FR? *.SA? 
 +prescan 
 +node HfA@fidonet -md HiA PASS 
 +</file> 
 + 
 +**Tip:** Use forward-slashes (''/'') in file names and paths in your ''binkd.cfg'' file (even on Windows) rather than backslashes (''\''). 
 + 
 +**Tip:** Use ''root-domain binkp.net'' in your ''binkd.cfg'' file to enable IP address look-ups from a FidoNet node number (e.g. FidoNet address ''1:103/705'' can be resolved to an IP address using the hostname ''f705.n103.z1.binkp.net''). This used to be possible using the domains ''fidonet.net'' and ''fidonet.org'', but not currently (use ''binkp.net'' instead). 
 + 
 +**NOTE:** If root-domain is used, it applies to //all// FTNs listed. This is not proper if you are in more than one FTN because all f.n.z DNS lookups will go to this domain no matter what FTN they are. In the case of binkp.net, it only knows fidonet. Each FTN that provides DNS lookups for f.n.z format need their own DNS lookup host specified. So you should use the newer format of binkd's domain lines which place the DNS lookup host at the end of the line. At this time, there are only four FTNs that provide f.n.z DNS lookups. For all others, do not put anything in the "DNS lookup host" field of the domain lines. When using this form of domain line, be sure to remove or comment out any root-domain line you may have. 
 + 
 +eg:<file binkd.cfg> 
 +  #domain FTN      outbound dir  zone  DNS lookup host 
 +  domain  fidonet  bP/outbound   fZ    binkp.net 
 +  domain  fsxnet   bP/outbound   fZ    fsxnet.nz 
 +  domain  scinet   bP/outbound   fZ    scinet-ftn.org 
 +  domain  vkradio  bP/outbound   fZ    ftn.vkradio.com 
 +</file> 
 +===== SBBSecho ===== 
 + 
 +FIXME - This howto show old sbbsecho config settings (must be update to new sbbsecho.ini format) 
 + 
 +Here's my ''[[config:sbbsecho.cfg]]'' file with the same replacements as above: 
 + 
 +<file sbbsecho.cfg> 
 +NOTIFY 1 
 +SECURE_ECHOMAIL 
 +FUZZY_ZONE 
 +FLO_MAILER 
 +KILL_EMPTY 
 +LOG 0FFFFFFF 
 +INBOUND bP/inbound/ 
 +SECURE_INBOUND bP/inbsecure/ 
 +OUTBOUND bP/outbound/ 
 +ARCSIZE 0 
 +PKTSIZE 0 
 +PKTPWD ALL PASS 
 +PACKER ZIP 0 504B 
 +  PACK /usr/local/bin/zip %f %s 
 +  UNPACK /usr/local/bin/unzip -j %f -d %s 
 +END 
 +USEPACKER  ZIP ALL 
 +AREAFIX    ALL PASS 
 +ROUTE_TO   HfA ALL 
 +</file> 
 + 
 +===== Multiple Zones ===== 
 + 
 +That's all fine and dandy if Fido is the only FTN network you're on... but what if you're a member of more than one (a.k.a. "othernets"). Well, things get a teensy bit more complicated. We'll need a couple more replacements. 
 + 
 +^Variable  ^Purpose ^ 
 +|xA        |Your complete othernet address (e.g.: 777:777/52) | 
 +|HxA       |Your x-league hub's FTN address (e.g.: 777:777/0) | 
 +|HxiA      |Your x-league hub's internet address | 
 +|xPASS     |The password for the othernet hub  | 
 + 
 +Moreover, we'll have to explicitly route all FidoNet stuff by zone to your fidonet hub. The DEFAULT ZONE does not change per network with sbbsecho... it is what's set up as the zone for your first FTN address. The following lines are added to the previous example ''binkd.cfg'' file: 
 + 
 +<file binkd.cfg> 
 +domain othernet bP/outbound fZ 
 +address xA@othernet 
 +node HxA@othernet -md HxiA xPASS 
 +</file> 
 + 
 + 
 +And the corresponding ''[[config:sbbsecho.cfg]]'' looks like this: 
 + 
 +<file sbbsecho.cfg> 
 +NOTIFY 1 
 +SECURE_ECHOMAIL 
 +FUZZY_ZONE 
 +FLO_MAILER 
 +KILL_EMPTY 
 +LOG 0FFFFFFF 
 +INBOUND bP/inbound/ 
 +SECURE_INBOUND bP/inbsecure/ 
 +OUTBOUND bP/outbound/ 
 +ARCSIZE 0 
 +PKTSIZE 0 
 +PKTPWD 1:ALL PASS 
 +PKTPWD 2:ALL PASS 
 +PKTPWD 3:ALL PASS 
 +PKTPWD 4:ALL PASS 
 +PKTPWD 5:ALL PASS 
 +PKTPWD 6:ALL PASS 
 +PKTPWD 777:ALL xPASS 
 +PACKER ZIP 0 504B 
 +  PACK /usr/local/bin/zip %f %s 
 +  UNPACK /usr/local/bin/unzip -j %f -d %s 
 +END 
 +USEPACKER  ZIP 1:ALL 
 +USEPACKER  ZIP 2:ALL 
 +USEPACKER  ZIP 3:ALL 
 +USEPACKER  ZIP 4:ALL 
 +USEPACKER  ZIP 5:ALL 
 +USEPACKER  ZIP 6:ALL 
 +USEPACKER  ZIP 777:ALL 
 +AREAFIX    1:ALL PASS 
 +AREAFIX    2:ALL PASS 
 +AREAFIX    3:ALL PASS 
 +AREAFIX    4:ALL PASS 
 +AREAFIX    5:ALL PASS 
 +AREAFIX    6:ALL PASS 
 +AREAFIX    777:ALL xPASS 
 +ROUTE_TO   HfA 1:ALL 
 +ROUTE_TO   HfA 2:ALL 
 +ROUTE_TO   HfA 3:ALL 
 +ROUTE_TO   HfA 4:ALL 
 +ROUTE_TO   HfA 5:ALL 
 +ROUTE_TO   HfA 6:ALL 
 +ROUTE_TO   HxA 777:ALL 
 +</file> 
 + 
 ===== See Also ===== ===== See Also =====
-  * [[:util:SBBSecho]]+  * [[http://www.doe.carleton.ca/~nsoveiko/fido/binkd/man/binkd.man.html|BinkD Manual]] ([[http://bbs.docksud.com.ar/binkd/Binkd%20-%20The%20Internet%20Binkley%20Daemon%20-%20Reference%20Page.html|mirror]]) 
 +  * [[http://binkd.org|BinkD Web-site]] 
 +  * [[util:SCFG:]]
   * [[:config:sbbsecho.cfg]]   * [[:config:sbbsecho.cfg]]
   * [[:howto:fidonet|Join FidoNet]]   * [[:howto:fidonet|Join FidoNet]]