====== UNIX ======
Frequently asked questions regarding Synchronet on UNIX and Unix-like operating systems (e.g. Linux).
* [[#flavors|What flavors of Unix (and Unix-like operating systems) are supported]]?
* [[#linux_distros|What distributions of Linux are supported]]?
* [[#64-bit|Are 64-bit operating systems supported]]?
* [[#installer|Is there any installer]]?
* [[#non-x86|Are non-x86 processors supported]]?
* [[#download|Where do I get Synchronet for Unix]]?
* [[#binaries|Will there be binary releases]]?
* [[#Mix with Windows]]?
* [[#DOS|Does Synchronet for Unix support external DOS programs/doors]]?
* [[#Doors|What doors can be used with Synchronet for Unix]]?
* [[#X Windows|Does Synchronet for Unix require X Windows]]?
* [[#GUI|Is there a graphic user interface for Unix sysops]]?
* [[#Compiler|Can I use a compiler other than GCC]]?
* [[#SELinux|What does nothing work with SELinux]]?
* [[#Disk space|How much disk space is required]]?
* [[#Terminal Type|What does an ''unknown terminal'' error indicate]]?
* [[#tempnam warning|Why do I get a warning about use of ''tempnam'' when compiling]]?
* [[#SDL Errors|How do I work around SDL 1.2 run-time errors]]?
* [[#Recycle|Why does the recycling of servers/services not work]]?
* [[#Maximum_Open_Files|How do I resolve ERROR 24 (Too many open files)]]?
===== Flavors =====
**Question:**\\
What flavors of Unix (and Unix-like operating systems) are supported?
**Answer:**\\
Currently there are four levels of support for Unix-like OSs.
- Operating systems and platforms which are actively used by the developers. These are always expected to work correctly. Currently, only Linux (x86 and x64) and FreeBSD on x86 are in this category.
- Platforms which have been ran by developers and an attempt to maintain support is exerted. These platforms are OS X, NetBSD, and OpenBSD on x86. In general a [[good bug report]] will result in a quick fix to these systems.
- Next there is non-x86 hardware with one of the above OSs. We try to ensure that Synchronet works on these platforms, but a bug report may be ignored for months before it is resolved due to lack of access to the platform. When reporting a bug, it would be good if the reporter is willing to grant remote shell access to their system and have a development toolchain installed.
- Lastly there are systems which will never be supported. These generally include systems with 16-bit address buses, lack of an implementation of the pthread API (such as Xenix systems), or ones which are generally painful to work on (such as GNU/Hurd).
===== Linux Distros =====
**Question:**\\
What distributions of Linux are supported?
**Answer:**\\
Should work with any GNU/Linux-x86 or x64 distribution (e.g. RedHat, Debian, Slackware, Ubuntu, Gentoo, etc.).
===== 64-bit =====
**Question:**\\
64-bit?
**Answer:**\\
64-bit Linux (x64, x86_64, x86-64) distributions are supported.
===== Installer =====
**Question:**\\
The installer (e.g. Linux-install from sbbsunix.tgz) segfaults, crashes, or fails to get the file size of sbbs_src.tgz.
**Answer:**\\
This installer has known issues and is currently **unsupported**. Do not use
it. This installer (known to us as "sbbsinst") may be revamped and re-released in the near future.
In the mean-time, follow the steps given in this document to download,
build, install, and run Synchronet for Unix.
===== non-x86 =====
**Question:**\\
Are non-x86/x64 (Alpha, SPARC, 68k, PowerPC, etc) processors supported?
**Answer:**\\
Not currently. Synchronet assumes a little-endian processor. It *may* work
on other little-endian processors (e.g. Alpha), but hasn't been tested.
===== Download =====
**Question:**\\
Where do I get Synchronet for Unix?
**Answer:**\\
See the step-by-step instructions [[:install:nix|here]].
===== Binaries =====
**Question:**\\
Will there be binary releases?
**Answer:**\\
Maybe. Linux is a particularly difficult "platform" to deliver consistently
compatible binaries for and unfortunately, it is the most popular Unix-like
operating system we currently support.
===== Mix with Windows =====
**Question:**\\
Can I mix Synchronet for Unix and Synchronet for Win32 or DOS or OS/2 nodes
on the same BBS?
**Answer:**\\
Yes. As long as all the nodes can access the same live data files (via LAN)
you can have as many instances of Synchronet on as many different platforms
as you wish.
===== DOS =====
**Question:**\\
Does Synchronet for Unix support external DOS programs/doors?
**Answer:**\\
Currently, only the FreeBSD build has doscmd support "built-in" (and this
"support" requires emulators/doscmd to be installed):
For FreeBSD, the path that is entered in the Start-up Directory is mapped
as C:\ the current node directory is mapped as D:\ and the Synchronet
root directory is mapped as E:\. When a DOS door is executed, a .doscmdrc
is created in the node directory. Copying this file and using it to run
doscmd in X11 mode while running the setup programs is the simplest way
to configure the doors.
Other platforms can use DOSEMU or whatever is available for running DOS
programs.
For running external DOS programs on Linux using DOSEMU, see [[howto:dosemu]] for details.
===== Doors =====
**Question:**\\
What external programs/doors does Synchronet for Unix support?
**Answer:**\\
External programs can either use standard I/O (e.g. bash, pico, Lord/X,
PimpWars) or socket I/O (e.g. Synchronet XSDK doors).
===== X Windows =====
**Question:**\\
Does Synchronet for Unix require X-Windows?
**Answer:**\\
No, Synchronet for Unix is currently a console-based application.
However, it does have an X-based character mode console now. The X11
headers (Part of the X11-devel package or something similar) are required
for this to work.
===== GUI =====
**Question:**\\
Are there any plans to make an X-Windows front-end for Synchronet?
**Answer:**\\
See [[monitor:gtkmonitor]].
===== Compiler =====
**Question:**\\
Can I use a different compiler (than GCC) to build Synchronet for *nix?
**Answer:**\\
Yes, currently Synchronet has successfully been built with GCC, ICC
(The Intel C Compiler), and Clang/LLVM. To specify an alternate compiler, add
''CC=icc CXX=icpc'' to the gmake command lines where icc is the C compiler name
and icpc is the C++ compiler name. If you get errors during the build (not
warnings) please submit a bug report. If you are using a commercial compiler
other than ICC, we will probably be unable to help you without a copy of the
compiler.
===== SELinux =====
**Question:**\\
I'm using SELinux and nothing works.
**Answer:**\\
Yes, you'll need to use chcon on each of the Synchronet shared objects (''.so'' files):
chcon -t texrel_shlib_t /sbbs/exec/*.so
===== Disk Space =====
**Question:**\\
How much disk space do I need?
**Answer:**\\
A fresh install (as of Mar-2020) from source code, requires about 500MBytes of space.
Much of the space consumed is in the form of intermediate build files which may be removed after the build is complete if space is a concern.
===== Terminal Type =====
**Question:**\\
What does the error ''Unknown terminal: pc3'' displayed by some native external programs (e.g. ''pico'') indicate?
**Answer:**\\
The error indicates that the value of your ''TERM'' environment variable (in the example case, ''pc3'') is not a valid terminal type/capabilities name for your system.
The default value of the ''ExternalTermANSI'' key in your ''[[:config:sbbs.ini]]'' file is ''pc3'', and Synchronet uses the value of this key to set the ''TERM'' environment variable for child processes (external programs). If your *nix installation has a terminal type/capability with this name, then this terminal type might work for you (and your users) but there is a better option: to use the Synchronet ''ansi-bbs'' terminal capabilities set (created by [[:person:Deuce]]). The configuration/installation instructions for the Synchronet ''ansi-bbs'' terminal capabilities set are covered in [[:config:nix#termcap]].
===== tempnam warning =====
**Question:**\\
Why do I get the GCC compilation warning: the use of `tempnam' is dangerous, better use `mkstemp' ?
**Answer:**\\
This is not an error but a harmless warning. You can safely ignore it.
To elaborate, [[util:SBBSecho]] uses ''tempnam'' for a specific purpose, which ''mkstemp'' does not do. Additionally ''mkstemp'' is not available in all the C libraries for all the platforms for which Synchronet is built. The //dangers// of ''tempnam'' do not apply to SBBSecho's use of the function.
===== SDL errors =====
**Question:**\\
How do I work around SDL_main errors (e.g. ''No protocol specified'' followed by a ''segmentation fault'') that prevent Synchronet applications (e.g. [[util:SCFG]], [[util:EchoCFG]], [[monitor:umonitor]], etc.) built with SDL 1.2 from running?
$ /sbbs/exec/scfg
No protocol specified
No protocol specified
No protocol specified
Segmentation fault (core dumped)
**Answer:**\\
Double check that you can run X applications (e.g. ''xterm'', ''xeyes'') and if you cannot, you may need to grant X access to other user accounts with a command like:
xhost +SI:localuser:
executed before switching to another user account (e.g. with ''su'' or ''sudo'').
Work-arounds:
- Clean re-build all of Synchronet without SDL support (include ''WITHOUT_SDL=1'' on the ''make'' command-lines or in your ''localdefs.mk'' file)
- Set the ''SDL_VIDEODRIVER'' environment variable to the value of ''dummy'' (e.g. ''EXPORT SDL_VIDEODRIVER=dummy'') before executing the program
===== Recycle =====
**Question:**\\
Why do my servers/services fail to recycle when I set the node-recycle flag (e.g. saving changes in [[util:SCFG]]) or when touching recycle [[config:semfiles]]?
**Answer:**\\
Servers will not recycle while they are in-use.
$ node rerun
Synchronet Node Display/Control Utility v1.34
Node 1: User #1 reading messages via telnet (M) [R]
Node 2: Waiting for connection [R]
Node 3: Waiting for connection [R]
Node 4: Waiting for connection [R]
Node 5: Waiting for connection [R]
Node 6: Waiting for connection [R]
Node 7: Waiting for connection [R]
Node 8: Waiting for connection [R]
**Question:**\\
What do the following warning-level log messages indicate?
Disabling Terminal Server recycle support
Disabling FTP Server recycle support
Disabling Web Server recycle support
Disabling Mail Server recycle support
Disabling Services recycle support
**Answer:**\\
Recycle support can be disabled manually be setting the ''NO_RECYCLE'' ''Options'' flag in one or more server sections of your ''[[config:sbbs.ini]]'' file.\\
The log warning messages above ("Disabling ... recycle support") indicate that the BBS automatically set the ''NO_RECYCLE'' option flag because it was:
- Configured to bind-to/listen-on TCP ports < 1024 (the so-called "reserved" ports)
- **and** the BBS was configured to change the current user-id in the ''[[config:sbbs.ini#UNIX]]'' section of ''[[config:sbbs.ini]]''
- **and** the BBS could not dynamically set the bind capabilities using the Linux "Capabilities" syscall interface.
The solution is to remove the ''User'' and ''Group'' settings from the ''[[config:sbbs.ini#UNIX]]'' section of ''[[config:sbbs.ini]]'' and then follow the instructions [[howto:Linux_non-root|here]] for running the BBS on Linux as a non-root user (if you haven't already).
===== Maximum Open Files =====
**Question:**\\
Why am I seeing ''ERROR 24 (Too many open files)'' failures in my error log?
**Answer:**\\
Versions of Synchronet prior to v3.19c contained a bug with the JavaScript //User// class that could cause a leak of open file descriptors (concurrent opens of the ''[[dir:data]]/user.dat'' file that were never closed). This bug, combined with a long-running //webv4// ''events.ssjs'' issue that could cause a lot of instances of the //User// class to linger in the JavaScript heap (since fixed with a call to ''js.gc()''), could cause "Too many open files" errors to occur.
**Answer:**\\
You need to increase your maximum number of open files.
\\ \\
**Checking current open file limits**\\
The most reliable way to determine your open file limit is to login to your BBS as a sysop, run the '';SHELL'' [[module:str_cmds|string command]], and at the OS command line, issue the commands below. The hard limit is the systemwide limit, and the soft limit is one that a user can raise (up to the hard limit).
To view the soft limit: ''ulimit -Sn''\\
To view the hard limit: ''ulimit -Hn''
Another method that works on Linux is to search for line beginning with "Max open files" in the file ''/proc/$(pidof sbbs)/limits'':
$ sudo grep "Max open files" /proc/$(pidof sbbs)/limits
Max open files 10000 10000 files
**If you start Synchronet with systemd**\\
If you're using [[howto:systemd|systemd]] to start sbbs, edit your service file (usually ''sbbs.service'') by adding the following line in the ''[Service]'' section:
LimitNOFILE=10000
After adding the line, reload the service file from the command line using ''systemctl daemon-reload''. Finally, restart Synchronet.
**If you start Synchronet manually or with a shell script**\\
If you start sbbs with a shell script, manually from the command line, or some other similar method, edit ''/etc/security/limits.conf'' to add the lines below.
To raise the soft limit for your Synchronet user, add this line:
yourBBSuser soft nofile 10000
===== See Also =====
* [[:faq:|Frequently Asked Questions]]
{{tag>unix linux}}