Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
ref:xmodem [2010/03/04 17:16] – created digitalmanref:xmodem [2011/07/13 23:49] (current) digitalman
Line 1: Line 1:
-====== XMODEM ====== +====== XMODEM, CRC XMODEM, WXMODEM File Transfer Protocols ====== 
-FIXME import ymodem.doc+ 
 +<code> 
 +    Please circulate this document anyway that you see 
 +    fit without alteration except on the page at the 
 +    end titled: "Notes and Comments" It is requested 
 +    that anyone using these protocols within a commer- 
 +    cial product not charge for them as an option or 
 +    surcharge, but include XMODEM and its derivations 
 +    as part of the basic product. 
 + 
 + 
 +                                     Peter Boswell 
 +                                     June 20, 1986 
 +                                     People/Link email: TOPPER 
 +</code> 
 +  
 +This document was converted to Wiki syntax by [[person:digital man|Rob Swindell]] on July-13-2011. 
 + 
 +===== Preface ===== 
 + 
 +In the years that have past since Xmodem was first developed as a file 
 +transfer protocol, many thousands of people have been involved in 
 +finding reasonable ways to move data via asynchronous telephone communications.  I appreciate the opportunity that I have had to meet and 
 +learn from many of these people.  There is nothing in this document 
 +that did not actually come from someone else.  Indeed, whether it is 
 +WXMODEM, X.PC, Synchronous dial-up X.25, SNA, ZMODEM, Blast, Kermit or 
 +any other protocol that becomes the dominant dial-up file transfer 
 +protocol for personal and home computers is just not important.  What 
 +is important is that the public domain have a high speed file transfer 
 +protocol that is reasonably popular and  commonly available for many 
 +types of personal computers, for bulletin boards and for services such 
 +as People/Link, Delphi, CompuServe, GEnie and The Source. 
 + 
 +Here are a few people that all of us should thank and I would especially like to recognize: 
 + 
 +  * Ward Christensen 
 +Ward, a true pioneer in the microcomputer 
 +communications area, is the author of the original Checksum 
 +Xmodem protocol.  Thanks for reminding me to "keep it simple 
 +stupid"
 +---- 
 +  * Chuck Forsberg 
 +Chuck has edited perhaps the best work on 
 +Xmodem and has provided both YMODEM (1K Xmodem) and ZMODEM 
 +(Windowed YMODEM) to the public domain.  Thanks for showing 
 +me a protocol which would deal with the X-On/X-Off problem 
 +and reminding me that there is such a thing as a DLE character. 
 +---- 
 +  * Richard (Scott) McGinnis 
 +Scott is the architect, the moving 
 +force, for the People/Link software system.  His ideas, 
 +comments and encouragement have been wonderful.  Wait until 
 +you see his visual conference program for the IBM PC! 
 +Thanks for showing me how to use a DLE. 
 +---- 
 +  * Gene Plantz 
 +Gene operates a major IBM PC bulletin board in 
 +the Chicago area and has been active in the National SYSOP 
 +Association.  Thanks for pushing me to do something about 
 +performance. 
 + 
 +---- 
 + 
 +In a historical perspective, there seems to be a common pattern in all 
 +computer systems development that can shed some light on where we stand 
 +and how we got here.  The pattern is function first, then integrity and 
 +finally performance. 
 + 
 +Any kind of software must first do something worthwhile.  There is no 
 +point in being error free, or inexpensive to operate if we do not want 
 +the function.  Back in 1977, Ward Christensen had a need to move data 
 +between microcomputers.  Within a year it became obvious that the 
 +function Xmodem provided met a real need to many microcomputer users. 
 + 
 +Once we have a new function and we accept it, there is a normal desire 
 +for the function to be correct.  No one can't count the times that new 
 +software users have pointed out ... "that new function is super, but 
 +the results are wrong" The effort changes from providing new function 
 +to providing integrity.  The development of CRC Xmodem is a clear 
 +response to the integrity phase of a service as it reduced undetected 
 +transmission errors by many orders of magnitude. 
 + 
 +After the integrity has been accepted, people begin to look toward cost 
 +and performance.  XMODEM entered this phase in 1984-1985.  Chuck 
 +Forsberg's YMODEM is a major step in this effort providing larger 
 +block sizes, batch mode and more.  His ZMODEM is a major step toward 
 +making XMODEM derivative protocols work effectively with Public Data 
 +Networks and most importantly, provides for restart of a file transfer 
 +at the point of failure.  WXMODEM, presented here, is an alternate 
 +solution to ZMODEM which is, hopefully, an easier solution to the most 
 +important performance problems. 
 + 
 +No one really knows where XMODEM and the file transfer function will go 
 +in the coming years.  Perhaps X.PC from Tymnet, MNP from Microcom or 
 +Synchronous X.25 will slowly push XMODEM, et. al, into history. 
 +think this will happen, but not for maybe 5 to 10 years.  Perhaps when 
 +50% of the households outgrow the Commodore 64, or when modem manufac- 
 +turers can provide a $50 synchronous modem we will see the beginning of 
 +the end for XMODEM, but not today. 
 +  
 + 
 +===== Introduction ===== 
 + 
 +XMODEM and its derivatives have become the primary method for file 
 +transfer for personal computers.  Hopefully this document will help 
 +people to understand these protocols and to implement them on their 
 +own.  In particular, this document presents an additional XMODEM 
 +derivation to the public domain: WXMODEM. 
 + 
 +=== Why develop another file transfer protocol? === 
 +After working with bulletin boards, Public Data Networks such as Tymnet 
 +and Telenet, and commercial host systems such as People/Link, Delphi, 
 +CompuServe and others, a number of people came to believe that hobbyist, home and business users would benefit significantly from a new, 
 +conceptually simple file transfer protocol which would provide improved 
 +performance and fully support the public data networks such as Tymnet, 
 +Telenet and Datapac. 
 + 
 +But before WXMODEM can be presented, XMODEM and CRC XMODEM must be 
 +described in detail. 
 + 
 +  
 +===== Terminology ===== 
 + 
 +I've elected to use two special terms: transmitter and receiver.  The 
 +transmitter is the computer/software which is transmitting data packets 
 +and receiving acknowledgement characters.  The receiver is the computer/software receiving the data packets and transmitting acknowledgement characters. 
 + 
 +Here is a table of special ASCII characters that are used throughout 
 +this paper: 
 +<code> 
 +      Name      Decimal        Hexadecimal    Description 
 + 
 +      SOH          01           H001          Start Of Header 
 +      EOT          04           H004          End Of Transmission 
 +      ACK          06           H006          Acknowledge (positive) 
 +      DLE          16           H010          Data Link Escape 
 +      X-On (DC1)   17           H011          Transmit On 
 +      X-Off(DC3)   19           H013          Transmit Off 
 +      NAK          21           H015          Negative Acknowledge 
 +      SYN          22           H016          Synchronous idle 
 +      CAN          24           H018          Cancel 
 +</code> 
 + 
 +===== XMODEM ===== 
 + 
 +Xmodem is a popular error recovery type protocol for transferring files 
 +between computers via serial, asynchronous communications.   Before 
 +learning more about Xmodem, it is important to hear what its author has 
 +to say: 
 + 
 +      "It was a quick hack I threw together, very unplanned (like 
 +      everything I do), to satisfy a personal need to communicate 
 +      with some other people.  ONLY the fact that it was done in 
 +      8/77, and that I put it in the public domain immediately, 
 +      made it become the standard that it is"....."People who 
 +      suggest I make SIGNIFICANT changes to the protocol, such as 
 +      'full duplex', 'multiple outstanding blocks', 'multiple 
 +      destinations', etc etc don't understand that the incredible 
 +      simplicity of the protocol is one of the reasons it survived 
 +      to this day in as many machines and programs as it may be 
 +      found in!" 
 +         
 + 
 +==== Xmodem Hardware Level Protocol ==== 
 +The protocol is Asynchronous, 8 data bits, no parity bit, one stop 
 +bit.  Modems which are commonly used are AT&T 103 (300 baud), AT&T 
 +212A (1200 baud) and CCITT V.22 (2400 baud). 
 + 
 +Typically, the data in a file is transmitted without change (if a 
 +7 bit machine, the left most, high order, bit is always zero) 
 +except that CP/M and MS/DOS operating systems want a ^Z (decimal 
 +26) to represent end-of-file. 
 + 
 +==== Xmodem Initiation ==== 
 + 
 + 
 +Prior to entering the protocol, both the transmitting and receiving computer must know where to get the data (what file is to be 
 +transmitted) and where to put the data (file to store the data or 
 +buffer area).  In Xmodem one side of the file transmission is 
 +always in charge (local computer), asking the other side (remote 
 +computer) to either transmit a file or to accept a file.  Through 
 +a dialog outside of Xmodem the local computer (your PC) first 
 +sends commands to the remote computer to select a file name 
 +to prepare to transmit or receive a file via XMODEM.  Once this is 
 +completed the remote computer enters the XMODEM protocol.  Now the 
 +local computer must be told what file to transmit or receive and 
 +it enters the XMODEM protocol, and hopefully data starts moving. 
 + 
 + 
 +Upon entering the Xmodem protocol, the transmitting computer waits 
 +between 10 seconds and a minute to receive an NAK character from 
 +the receiving computer.  The receiving computer is said to drive 
 +the protocol.  The transmitter may retry any number of times.  If 
 +any character other than a NAK or CAN is read by the transmitter, 
 +it is ignored.  The CAN character implies cancellation of the 
 +Xmodem file transfer and that the transmitter should leave the 
 +Xmodem protocol.  Once the receiver has sent a NAK, it will wait 
 +10 seconds for data to begin to arrive.  If none arrives in 10 
 +seconds, the receiver will send another NAK and continue to repeat 
 +10 times at which point the receiver will leave the Xmodem 
 +protocol (typically with a super cryptic error message such as 
 +"aborted", "NAK retry maximum exceeded"). 
 + 
 +<code> 
 +      Transmitter                        Receiver 
 + 
 +      [wait for one minute]         <    [NAK] 
 + 
 +      [begin block transmission]    > 
 +</code> 
 + 
 +==== Xmodem Data Transmission ==== 
 + 
 + 
 +The transmitter takes the data, divides it into 128, 8 bit byte 
 +pieces and places it in an Xmodem Packet. 
 + 
 +The Xmodem Packet looks like this: 
 +<code> 
 +       [SOH] [seq] [cmpl [seq] [128 data bytes] [csum] 
 + 
 +       SOH       Start of header character (decimal 1). 
 + 
 +       seq       one byte sequence number which starts at 1, and 
 +                 increments by one until it reaches 255 and then 
 +                 wraps around to zero. 
 + 
 +       cmpl seq  one byte 1's complement of seq.  This can be 
 +                 calculated as cmpl = 255 - (255 and seq) or using 
 +                 xor as cmpl = (255 and seq) xor 255. 
 + 
 +       data      128, 8 bit bytes of data.  Note than when sending 
 +                 CP/M and MS/DOS files a ^Z (decimal 26) must be 
 +                 added to then end of the file.  If the last block 
 +                 of data is less than 128 bytes, the Xmodem packet 
 +                 must be padded with characters, usually ^Z's. 
 + 
 +       csum      one byte sum of all of the data bytes where any 
 +                 overflow or carry is discarded immediately.  For 
 +                 example, if the first 3 bytes are 255, 5 and 6 the 
 +                 checksum after the first 3 bytes will be 10. 
 +</code> 
 +  
 +Once Xmodem Initiation has completed, the transmitter sends the 
 +first Xmodem packet and then waits.  After the receiver has the 
 +full packet, it will compare its own checksum calculation with the 
 +checksum that was sent by the transmitter.  If the checksums 
 +match, the receiver will send an ACK.  If the checksums are 
 +different, the receiver will send a NAK. 
 + 
 +After receiving an ACK the transmitter will send the next Xmodem 
 +packet.  If a NAK is received, the transmitter will resend the 
 +same XMODEM packet again. 
 + 
 +Once the transmitter has sent the last Xmodem packet and has 
 +received an ACK, the transmitter will send an EOT and then wait 
 +for a final ACK from the receiver before leaving the Xmodem 
 +protocol.  When the receiver sees an EOT instead of an SOH (the 
 +first character the next packet), the receiver transmits an ACK 
 +character, closes its files and leaves the Xmodem protocol. 
 + 
 +Let's look at a three block file transfer: 
 +<code> 
 +       Transmitter                                  Receiver 
 + 
 +                                     <<<<<          [NAK] 
 +       [SOH][001][255][...][csum]    >>>>> 
 +                                     <<<<<          [ACK] 
 +       [SOH][002][254][...][csum]    >>>>> 
 +                                     <<<<<          [ACK] 
 +       [SOH][003][253][...][csum]    >>>>> 
 +                                     <<<<<          [ACK] 
 +       [EOT]                         >>>>> 
 +                                     <<<<<          [ACK] 
 +</code> 
 +Seems easy, right?  And it is, until something goes wrong. 
 + 
 +==== Xmodem Cancellation ==== 
 + 
 +It has become a defacto standard that the receiver may cancel the 
 +file transfer by sending a CAN character and then leaving the 
 +protocol.  If the transmitter receives a CAN character when 
 +expecting either a NAK or ACK, the transmitter is to terminate and leave the protocol.  Likewise, if the receiver sees a CAN 
 +when expecting an SOH (start of packet) it should terminate the 
 +file transfer.  Many implementations now require two CAN characters before recognizing a cancel condition. 
 + 
 +==== Xmodem Error Recovery and Timing ==== 
 + 
 +Error detection and recovery are the primary purposes of the 
 +Xmodem protocol.  The transmitter and receiver should continue to 
 +retry until 10 errors in a row have occurred.  Some of the common 
 +error conditions are listed below: 
 + 
 +=== Complement Error === 
 + 
 +If the sequence number does not match the complement 
 +sequence number, the packet must be discarded and a NAK 
 +sent to the transmitter. 
 + 
 +=== Duplicate packet condition === 
 + 
 +If the sequence number is the same as the sequence 
 +number of the last packet received, the packet should be 
 +discarded and an ACK sent to the transmitter. 
 + 
 +=== Out of sequence error === 
 + 
 +If the sequence number matches the complement sequence 
 +number and it is neither the expected sequence number 
 +nor the last sequence number, the receiver should send 
 +two CAN characters and leave the Xmodem protocol 
 +(e. g. abort the file transfer). 
 + 
 +=== Receive timeout errors === 
 + 
 + 
 +When expecting data, if 10 seconds ever pass without 
 +receipt of a character, the receiver should send another 
 +NAK.  This should be repeated 10 times.  Some implementations will timeout after 10 seconds waiting for the 
 +first character of a packet, SOH, and then reduce the 
 +timeout for characters in a packet.  The timeout should 
 +not go below 5 seconds if the protocol is to be used 
 +with public data networks. 
 + 
 +=== Transmit timeout errors === 
 + 
 + 
 +In the original protocol, the transmitter would wait 10 
 +seconds for an ACK, NAK or CAN and then retransmit the 
 +last Xmodem packet as if a NAK had been received.  Most 
 +implementations either have the transmitter wait for a 
 +very long time (30 seconds to a minute) and then 
 +terminate the file transfer if an ACK, NAK or CAN has 
 +not been receive or wait about 30 seconds and retransmit 
 +the last packet. 
 + 
 +=== Packet synchronization errors === 
 + 
 + 
 +Since extraneous characters are frequently generated 
 +when using asynchronous communications, the receiver 
 +should not count on receiving exactly 132 characters for 
 +each Xmodem packet.  One algorithm for re-synchronization goes as follows: 
 + 
 +  * Assume that the checksum algorithm will cause re-transmission of Xmodem packets which contain extraneous               characters. 
 + 
 +  * If the character received when expecting the start of a                   packet is not a SOH then ignore the character and               continue to search for a SOH. 
 + 
 +  * Once a SOH is found, assume that the next two characters                    will be a valid sequence number and complement.  If they                    are complements then assume that the packet has begun.                    If they are not complements, continue to search for a                    SOH. 
 + 
 +  * Send a NAK if a timeout occurs while attempting to  re-synchronize (e.g. continue to process timeouts as described above). 
 +  * If no re-synchronization occurs within 135 characters  then send a NAK character and retry receiving the packet. 
 + 
 +=== False EOT condition === 
 + 
 + 
 +When the receiver sees an EOT (which was not sent by the 
 +transmitter, but generated out of a communications error) 
 +instead of a SOH character, the receiver assumes incorrectly 
 +that the complete file has been transmitted.  This is 
 +typically an unrecoverable error and it does occur especially 
 +when the transmitting and receiving UARTs are clocked 
 +slightly differently.  An algorithm to detect false EOT might 
 +return a NAK for the first EOT received and only assume true 
 +end of transmission after receiving two EOT's. 
 +<code> 
 +        Transmitter                   Receiver 
 + 
 +        [last block .. ]    >>>>> 
 +                            <<<<<     [ACK] 
 +        [EOT]               >>>>> 
 +                            <<<<<     [NAK] 
 +        [EOT]               >>>>> 
 +                            <<<<<     [ACK] 
 +</code> 
 +Just in case the transmitter was not prepared to resend the 
 +EOT, it might be wise to set the timeout to about 3 seconds 
 +and retransmit the NAK up to 3 times and then issue a warning 
 +message but assume end of transmission. 
 + 
 +  
 + 
 + 
 +=== False CAN condition === 
 + 
 + 
 +Some Xmodem implementations will terminate on a single CAN 
 +character.  Occasionally a CAN character will be generated by 
 +a communications error and if this occurs and is seen by the 
 +receiver between packets or is ever seen by the transmitter, 
 +the file transfer will be incorrectly canceled.  Many 
 +implementations now require two CAN characters in a row 
 +before assuming that the file transfer is to be aborted. 
 + 
 +  
 + 
 + 
 +===== CRC XMODEM ===== 
 + 
 + 
 +CRC Xmodem is very similar to Checksum Xmodem.  The protocol initiation 
 +has changed and the 8 bit checksum has been replaced by a 16 bit CRC. 
 +Only theses changes are presented. 
 + 
 +One of the earliest and most persistent problems with Xmodem were 
 +transmission errors which were not caught by the checksum algorithm. 
 +Assuming that there is no bias in asynchronous communications errors, 
 +we would expect that 1 out of every 256 erroneous complete or oversized 
 +Xmodem packets to have a valid checksum.  With the same assumption, if 
 +the checksum were 16 bits, we would expect 1 out of every 65,536 
 +erroneous complete or oversized packets would have a valid checksum. 
 + 
 +==== CRC Calculation Rules ==== 
 + 
 + 
 +Considerable theoretical research has shown that a 16 bit cyclical 
 +redundancy check character (CRC/16) will detect a much higher 
 +percent of errors such that it would only allow 1 undetected 
 +bit in error for every 10^14 bits transmitted.  That's 1 undetected error per 30 years of constant transmission at 1 megabit per second.  However, my personal experience indicates that 
 +something around 10^9 to 10^10 is more realistic.  Why such a vast 
 +improvement over the checksum algorithm?  It is caused by the 
 +unique properties that prime numbers have when being divided into 
 +integers.  Simply stated, if an integer is divided by a prime 
 +number, the remainder is unique.  The CRC/16 algorithm treats all 
 +1024 data bits in an Xmodem packet as an integer, multiples that 
 +integer by 2^16 and then divides that 1040 bit number by a 17 bit 
 +prime number.  The low order 16 bits of the remainder becomes the 
 +16 bit CRC. 
 + 
 +The 17 bit prime number in CRC Xmodem is 2^16 + 2^12 + 2^5 + 1 or 
 +65536 + 4096 + 32 + 1 = 69665.  So calculating the CRC is simple, 
 +just multiply the 128 byte data number by 65536, divide by 69665 
 +and the low order 16 bits of the remainder are the CRC.  The only 
 +problem is, I've never seen a computer which has instructions to 
 +support 130 byte integer arithmetic!  Fortunately for us, Seephan 
 +Satchell, Satchell Evaluations, published a specification a very 
 +efficient algorithm to calculate the CRC without either 130 byte 
 +arithmetic or bit manipulation.  Appendix A contains the source 
 +code, in IBM/PC BASIC, for the calculation of a CRC. 
 + 
 +Other methods of calculating CRC's for Xmodem involve bit level logic.((Chuck Forsber, "X/Ymodem Protocol Reference")) 
 + 
 + 
 +==== CRC Xmodem Initiation ==== 
 + 
 + 
 +The initiation of CRC Xmodem was designed to provide for automatic 
 +fall back to Checksum Xmodem if the transmitter does not support 
 +the CRC version. 
 + 
 +The receiver requests CRC Xmodem by sending the letter C (decimal 
 +67) instead of a NAK.  If the transmitter supports CRC Xmodem, it 
 +will begin transmission of the first Xmodem packet upon receipt of 
 +the C.  If the transmitter does not support CRC Xmodem, it will 
 +ignore the C.  The receiver should timeout after 3 seconds and 
 +repeat sending the C.  After 3 timeouts, the receiver should fall 
 +back to the checksum Xmodem protocol and send a NAK. 
 + 
 + 
 + 
 +===== Windowed XMODEM (WXMODEM) ===== 
 + 
 +This section assumes that the reader is already familiar with Xmodem and CRC Xmodem presented above. 
 + 
 +First, Xmodem provided the basic file transfer function, then CRC 
 +Xmodem improved the data integrity, now we come to WXmodem which 
 +provides better cost/performance. 
 + 
 +==== WXmodem Design Criteria ==== 
 + 
 + 
 +A few people began discussing improvements to Xmodem with me in 
 +late 1985, over time we developed the following criteria: 
 +  - The protocol must be as similar as possible to the XMODEM originally developed by Ward Christensen. The popularity of XMODEM, I believe, is based on its conceptual simplicity.  More software writers are familiar with this protocol than any other. More files are transferred everyday by this protocol than any other asynchronous protocol. Simplicity here implies a limited number of rules for timing, error recovery and initiation. 
 +  - The protocol must overcome the propagation delay that is characteristic of the public data networks.  While the cost of long distance communication is 50 to 90% less via the public data networks than via the public voice networks, the propagation delays inherent in public data networks both reduces the cost savings and increases the aggravation that occurs while watching a computer slowly perform a file transfer. 
 +  - The protocol must overcome the flow control problems which are characteristic in many public data network situations.  Basically, in most situations, the X-On and X-Off characters must always be used for flow control and only for flow control when using public data networks. 
 +  - The protocol should improve error recovery by simplifying the manner in which a programmer can determine the beginning of an XMODEM block.  Since the Start of Header character (SOH) can appear in the data or CRC, the programmer must use a relatively sophisticated method to determine if a SOH actually represents the beginning of a XMODEM block. 
 + 
 +==== Transparency and Flow Control Rules (Byte Level Rules) ==== 
 + 
 + 
 +This protocol provides special public data network support for 
 +non-X.25 hosts and PC-Pursuit access to bulletin boards.  In order 
 +to accomplish this, the transmitter is not permitted to transmit 
 +the X-On and X-Off characters in the Xmodem packets.  The reason 
 +for this restriction is simple: 
 + 
 +  * By the very nature of X.25 public data networks, without flow control, buffer overruns and lost data are inevitable from time to time at any baud rate. 
 + 
 +  * To avoid data loss public data networks must always assume that any X-Off and X-On character is a flow control character when supporting PC-Pursuit for bulletin boards and when supporting non-X.25 host systems. 
 + 
 +Since many non-X.25 hosts, bulletin boards and communications 
 +programs use X-On and X-Off as flow control characters, public 
 +data networks must support those X-Off and X-On requests at the 
 +point of connection where the X-Off is received by the public data 
 +network.  Otherwise, as many as several hundred characters backed 
 +up in the network would be transmitted by the public data network 
 +before the X-Off used for flow control reached the transmitter. 
 +The public data network has no way to know whether an X-On/X-Off 
 +protocol or Xmodem is operational at any point in time.  Therefore 
 +a Xmodem packet which contains an X-Off character and no succeeding X-On character will cause the public data network to stop 
 +forwarding the ACK or NAK. 
 + 
 +In addition, error recovery requires sophisticated programming for 
 +the receiver to determine the start of an XMODEM packet.  This 
 +protocol simplifies this task by dedicating a special character as 
 +an indicator that an XMODEM packet is about to begin.  The 
 +SYN (synch, decimal 22) character is used for this purpose. 
 +The presence of one or more SYN characters in a data stream always 
 +indicates that the next non SYN character is the beginning of an 
 +XMODEM packet (e.g. SOH). 
 + 
 +The method used here to handle these situations is through the 
 +insertion of the DLE character (H010, decimal 16, data link escape 
 +character) as an indicator that the character following the DLE is 
 +in fact a modified DLE, SYN, X-On, or X-Off character. 
 + 
 +=== Rules === 
 + 
 +  - Whenever an X-On, X-Off, SYN or DLE character is  about to be transmitted as any part of an actual                      XMODEM packet including the CRC, the transmitter                         will transmit instead a DLE character followed by                         the original character which has been modified by                         exclusive or'ing it with 64 to its value. 1 
 +  - The inserted DLE characters are not counted in the                         128 byte data length of the data portion of the                          XMODEM packet.  Indeed, it would be possible to                          have a packet which is physically 264 bytes in                          length because the Xmodem block sequence number                          (or its complement), all of the 128 data characters                          and two CRC characters are all either X-On, X-Off,                          SYN or DLE characters. 
 +  - Neither the DLE nor the adjusted characters are                         used in the CRC calculation, rather the original                         character is always used in the CRC calculation. 
 +  - When the receiver sees a DLE character, it does not                         count it in the XMODEM block length calculation,                         nor compute it in the CRC calculation but discards                          it and then remembers to exclusive or the next                         character with 64 and to verify that the result                         character is either a DLE, SYN, X-On or X-Off (the                         receiver will reject the packet unconditionally, if                         not one of those four characters) and then include                         the character as part of the packet. 
 +   - Prior to transmission of a XMODEM packet, the                         transmitter will send one or more SYN characters                         (recommend two) as a positive indicator to the                          receiver of the beginning of a Xmodem packet.2 
 +  - Except for the character received after a DLE, the                         receiver will test each incoming character to see                         if it is a SYN character.  If it is, it will                         discard the character and assume that the next                         character will be another SYN or SOH.  If a SYN                          character is received in the middle of a packet,                          the receiver will NAK that packet.  The purpose of                          the SYN character is to simplify recognition of the                          beginning of a XMODEM packet by the receiver.  Once                          an out of synch condition occurs on incoming                          data, the receiver can just ignore every incoming                          character until it sees a SYN.  Existing XMODEM                          code which already properly deals with this                          situation could just always discard any SYN                          character at time of receipt with no further                          action. 
 +  - The transmitter must support flow control characters (X-On, and X-Off) during transmission of                         packets.  Upon receipt of an X-Off it will wait 10                          seconds for an X-On and will start transmission                          again after 10 seconds or an X-On is received,                          whichever occurs first.  Any extraneous X-On                          characters received by the transmitter will be                          ignored and discarded.  (Note that this does NOT                          apply to X.25 host computers which use X.25 L2 and                          L3 windows for flow control.) 
 + 
 +==== Initial Handshake Rules ==== 
 + 
 + 
 +An initial handshake is provided to permit the receiver to 
 +indicate to the transmitter whether it can support checksum 
 +Xmodem, CRC Xmodem, or Windowed Xmodem: 
 + 
 +  - WXMODEM - The receiver will send a character W                         (decimal 87) and wait 3 seconds for the beginning                          of a Xmodem packet.  This will be repeated 3 times                          and then the receiver will  drop down to CRC Xmodem. 
 +  - CRC XMODEM - The receiver will send a character C                         (decimal 67) and wait 3 seconds for the beginning                          of a Xmodem packet.  This will be repeated 3 times                          and then the receiver will drop down to Checksum                          Xmodem. 
 +  - Checksum XMODEM -  The receivers will send a NAK                         and wait up to 3 seconds for the beginning of a                          Xmodem packet.  This will be repeated 4 times and                          if no valid SOH is received, the receiver will                          abort the file transfer request. 
 + 
 +==== Window Packet Transmission Rules ==== 
 + 
 + 
 +In order to overcome the propagation delays inherent with public 
 +data networks such as Tymnet, Telenet, Datapac, IPSS, Transpac and 
 +dozens more, the protocol must permit the transmitter to send more 
 +than one packet before receiving an acknowledgement from the 
 +receiver.  The number of packets that the transmitter will send 
 +before stopping transmission if an acknowledgement has not been 
 +received is called the "window" WXmodem uses a window of 4 
 +packets for several reasons.  Most importantly, it uses a single 
 +set of timing rules which would deal reasonably well with a wide 
 +range of baud rates (that implied keeping the window fairly 
 +small).  Secondly, the window sequence number is directly related 
 +to the Xmodem packet sequence number which, hopefully, will 
 +simplify implementation of windowing. 
 +  
 + 
 + 
 +=== Rules === 
 + 
 +1. The window is always 4 Xmodem packets.  That is, the transmitter will send 4 unacknowledged packets.  Transmission will not cease and the time out                         interval will not begin until 4 unacknowledged                         packets have been transmitted.  Note that the                         window may be less than 4   Xmodem packets for short                         files or at end-of-file. 
 +                          
 +2. The receiver will transmit acknowledgements in the form: 
 + 
 +   ACK[sequence] 
 + 
 +The [sequence] field is an 8 bit number where the 
 +high order or most significant 6 bits are always 
 +zero and the low order or least significant 2 bits 
 +are always the same as the low order 2 bits of the 
 +XMODEM block sequence number of the XMODEM packet 
 +being acknowledged (value in decimal may range 
 +from 0 to 3). 
 + 
 +3. The receiver does not have to acknowledge every 
 +packet, but must acknowledge at minimum every 
 +fourth packet.  The transmitter will accept one 
 +ACK[sequence] for multiple XMODEM packets.  For 
 +example, after an unknown number of packets: 
 +<code> 
 +         Transmitter                             Receiver 
 + 
 +         .... 
 +         .... 
 +         .... 
 +         [Block Sequence Number H0FE] 
 +         [Block Sequence Number H0FF]            ACK[H002] 
 +         [Block Sequence Number H000]            ACK[H003] 
 +         [Block Sequence Number H001] 
 +         [Block Sequence Number H002]            ACK[H001] 
 +         ..... 
 +</code> 
 +Since some transmitters must close the window and 
 +cease all communications before doing disk I/O to 
 +read more data, it is suggested that acknowledgements be sent for every packet (except when the 
 +receiver can easily determine that another packet 
 +is already being received at the point in time that 
 +the ACK[sequence] is about to be sent).3 
 + 
 +  
 + 
 +4. The receiver will reject a packet (request retransmission) by sending: 
 + 
 +    NAK[sequence] 
 + 
 +Where [sequence] is then next window sequence 
 +number (between H000 and H003) after the [sequence] 
 +of the last good block.  The receiver will discard 
 +up to 3 Xmodem packets received after the NAK is 
 +transmitted until it receives the packet with the 
 +sequence number that had previously been nak'ed by 
 +the receiver.  The receiver will not send a second 
 +NAK until another packet with the same sequence 
 +number is received which is also invalid or a 
 +timeout has occurred. 
 + 
 +5. When the transmitter receives a NAK[sequence], it 
 +will complete transmission of any XMODEM block 
 +currently being transmitted and then begin re- 
 +transmission starting with the block which was 
 +nak'ed. 
 + 
 +6. The receiver will discard duplicate packets but 
 +count them in the window for purposes of deter- 
 +mining the maximum receive window without an ACK in 
 +response.  For example, if the receiver gets packet 
 +sequence number 127 four times in a row, it must 
 +send an ACK H003 even if the receiver has previously acked that block. 
 + 
 +7. The timeout intervals at various points in processing are: 
 + 
 +  * Waiting for a character on receive, start of packet  not yet recognized:   15 seconds 
 +  * Waiting for a character on receive, start of packet has been recognized:   15 seconds 
 +  * Waiting for an Ack or Nak on transmit side after the window has closed:    15 seconds4 
 +  * Waiting for an X-On after receipt of an X-Off by the transmitter:          10 seconds 
 + 
 +8. When the transmitter times out waiting for an ACK                         or NAK when the window is closed (e.g. four blocks                         have been transmitted), the transmitter will                         retransmit the last block transmitted and wait                         again.  Only after 10 consecutive timeouts have                         occurred will the transmitter cancel the transmission. 
 + 
 +9. Where possible, it is recommended that the receiver                         return an ACK[sequence] for every packet or at                         least 50% of the Xmodem packets.  When the receiver                         must wait for the window to close (e.g. receive 4                         Xmodem packets without an acknowledgement),                         some performance benefit will be lost. 
 + 
 +If the receiver cannot overlap disk I/O and communications 
 +I/O, the receiver can temporarily stop transmission by either: 
 + 
 +  - "Closing the window" (e.g. receiving 4 blocks without sending               an ACK[sequence]) performing the disk I/O and then sending an                ACK[sequence]. 
 +  - Transmitting an X-Off followed by an X-On when the receiver               is ready to resume accepting data.  Note that the receiver               should be prepared to accept data for about a 1/4 of a second               after the X-Off is sent to cover situations where satellite               propagation delay may occur.  One possible implementation               would let the computer user set the "X-Off delay time" so               that in the normal case the X-Off delay could be set to 25               milleseconds.  A sophisticated implementation might set the               initial X-Off delay at 250 milleseconds and then reduce it               based on experience during the file transfer. 
 +  - Each approach has its advantages, but the X-Off approach will               provide the best performance in most cases especially when               using a public data network.  Note, however, that some               computers, notably the Commodore 64 and the IBM PC Jr cannot               receive communications data while writing to disk. 
 + 
 +  
 +==== Notes for X.25 Hosts ==== 
 + 
 + 
 +Host computer systems which utilize the X.25 protocol 
 +(examples: People/Link, Delphi, CompuServe, The Source) to 
 +interface with the various public data networks may send special 
 +control packets which change the manner in which the network will 
 +communicate with the remote personal computer, bulletin board or 
 +terminal.  For the purposes of this paper, it is assumed that the 
 +X.25 host can already support CRC and/or Checksum Xmodem and 
 +present only the changes for WXMODEM. 
 + 
 +  - When an X.25 Host is the transmitter, it must be                         sure to set the distant X.3 PAD parameters to                         assure that the receiver can use X-Off/X-On for                         flow control.  This is accomplished by sending a                         Q-Bit command packet to set X.3 parameter 12 to a 1                         prior to the initial handshake.  Note that if the                         receiver cannot support WXMODEM, the X.25 Host must                         send the appropriate Q-Bit packet to reset parameter 12 to a 0 before transmitting the first CRC                         or Checksum Xmodem packet. 
 +  - When an X.25 Host is the receiver and in WXMODEM                         mode, it must be sure to set the distant X.3 PAD                         parameters to assure that the network will use                         X-Off/X-On for flow control between the network and                         the transmitter to prevent its buffers from                         overflowing.  This is accomplished by sending a                         Q-Bit command packet to set X.3 parameter 5 to a 1                         prior to the initial handshake. 
 + 
 +  
 + 
 +===== Appendix A - CRC Calculation Rules ===== 
 + 
 + 
 +The purpose of this appendix is to give non-technical and non mathematical software writers a cook book approach to calculating the CRC-16 
 +used in Xmodem.  We have half accomplished that goal.  The BASIC code 
 +in the examples below has been tested on an IBM PC and found to work 
 +effectively even at 9600 with compiled Basic.  Some BASIC languages do 
 +not offer an XOR function and others do not have MKI$ and CVI functions 
 +which simplified the movement of data between data types.  Someday we 
 +hope to provide a Commodore C-64/C-128 implementation which simulates 
 +XOR, but not today! 
 + 
 +My thanks go to Chuck Forsberg, Joe Noonan, John Byrns and Stephen 
 +Satchell.  Without their help and public domain documents, this would 
 +have never been possible. 
 + 
 +==== IBM PC - 8088/8086 Data Structure ==== 
 + 
 + 
 +The Intel 8080 and upward has a feature, convenient only to some 
 +electrical engineer somewhere, which places 2 byte (16) bit 
 +integers in BYTE REVERSE order in memory.  That is, the least 
 +significant byte is placed in memory before the most significant 
 +byte for integer operations.  If A$ is one byte containing the 
 +number 52 and it is assigned to I% using the ASC function, the 
 +binary value (52) ends up in the first byte of I% and the second 
 +byte is zero. 
 +<code> 
 +                          Result 
 + 
 +      I%=0                [x'0000'
 +      I%=1                [x'0100'
 +      A$="A"              [x'41'
 +      I%=ASC(A$)          [x'4100'
 +      B$=MKI$(I%)         [x'4100' letter "A" then binary zero 
 +      I%=CVI(CHR$(0)+A$)  [x'0041'
 +      A$=CHR$(65)         [x'41'
 +</code> 
 +Once this is understood, many problems with these algorithms goes    away. 
 + 
 +==== BASIC Implementation of Bit Shift Method ==== 
 + 
 + 
 +The bit shift method here was converted from the "C" logic 
 +presented in Chuck Forsberg's "Xmodem/Ymodem" protocol reference 
 +and from an old IBM two page reference guide that Joe Noonan 
 +carries with him in his appointment calendar! 
 + 
 +=== Chucks' "C" code: === 
 +<code> 
 + 
 +     /* 
 +      * This function calculates the CRC used by the XMODEM/CRC Protocol 
 +      * The first argument is a pointer to the message block. 
 +      * The second argument is the number of bytes in the message block. 
 +      * The function returns an integer which contains the CRC. 
 +      * The low order 16 bits are the coefficients of the CRC. 
 +      */ 
 +     int calcrc(ptr, count) 
 +     char *ptr; 
 +     int count; 
 +     { 
 +         int crc, i; 
 + 
 +         crc = 0; 
 +         while (--count >= 0) { 
 +          crc = crc ^ (int)*ptr++ << 8; 
 +          for (i = 0; i < 8; ++i) 
 +              if (crc & 0x8000) 
 +               crc = crc << 1 ^ 0x1021; 
 +              else 
 +               crc = crc << 1; 
 +          } 
 +         return (crc & 0xFFFF); 
 +     } 
 +</code> 
 + 
 + 
 +But in IBM PC BASIC, our implementation looks like: 
 +<code> 
 +     100 DEFINT A-Z 'DEFAULT IS TWO BYTE INTEGERS 
 +     2000 REM * V$ CONTAINS 133 CHARACTER COMPLETE XMODEM PACKET 
 +     2010 REM * CRC$ IS TWO BYTE CRC WITH MOST SIGNIFICANT BYTE FIRST 
 +     2020 CRC$=CHR$(0)+CHR$(0)                      'START AT ZERO 
 +     2030 FOR I2=4 TO 131 
 +     2040   A$=MID$(V$,I2,1) 
 +     2050   GOSUB 4000 
 +     2060 NEXT I2 
 +     2070 REM * CRC$ CONTAINS CALCULATED CRC! 
 + 
 +     3000 IF CRC$=MID$(V$,132,2) THEN ....    'IT'S GOOD!!! 
 + 
 +     4000 REM * CRC BITWISE CALCULATION (WHAT A JOKE!) 
 +     4010 CRCH1=ASC(LEFT$(CRC$,1)) XOR ASC(A$) 
 +     4020 CRCL1=ASC(RIGHT$(CRC$,1)) 
 +     4030 FOR I3 = 0 TO 7 
 +     4040   CARRY=0 : IF CRCH1 > 127 THEN CARRY=-1  'IS HIGH BIT ON IN CRC? 
 +     4050   CRCH1=(CRCH1*2) AND 255                 'CRCH << 1 AND 255 
 +     4060   IF CRCL1>127 THEN CRCH1=CRCH1+1 'IF CRCL CARRIES THEN INCR CRCH 
 +     4070   CRCL1=(CRCL1*2) AND 255                 'CRCL << 1 AND 255 
 +     4080   IF CARRY=0 THEN GOTO 4105               'IF HIGH BIT WAS ON, 
 +     4090   CRCH1=CRCH1 XOR 16                      'XOR WITH &H1021 
 +     4100   CRCL1=CRCL1 XOR 33 
 +     4110 NEXT I3 
 +     4130 CRC$=CHR$(CRCH1)+CHR$(CRCL1) 
 +     4140 RETURN 'WHEW 
 +</code> 
 + 
 +That routine will execute 128 * 7 + 128 * 9 * 8 BASIC statements 
 +for each Xmodem packet or 10112 statements per Xmodem packet!  It 
 +will work for low baud rates in compiled BASIC, but just is too 
 +much for interpretive BASIC. 
 + 
 +==== BASIC Implementation of the Table Method ==== 
 + 
 + 
 +This method is based on routine M4 in Steven Satchell's paper, 
 +"Test of CRC Routines for CRC-CCITT", but has some very signifi- 
 +cant differences.  A table of 256 CRC's, originally calculated 
 +with the bit shift method is used to avoid performing the bit 
 +shift during communications.  The table contains the CRC's for 
 +each byte value from 0 to 255 when the original CRC is zero.  The 
 +result of this calculation is included in the DATA statements in 
 +the code. 
 + 
 +The comments are intended to show what is logically happening 
 +rather than physically.  Because of the "byte reverse" nature of 
 +integers in the 8088, a logical shift of 8 bits to the left is a 
 +physical shift of eight bits to the right! 
 +<code> 
 +     200 DEFINT A-Z  'ALL INTEGERS 
 +     210 DIM CRCTB(256) 
 + 
 +     300 GOSUB 9000 'INITIALIZE CRC TABLES 
 + 
 +     6200 REM * CRC CALCULATION USING TABLE METHOD, V$=XMODEM PACKET 
 +     6210 CRC$=CHR$(0)+CHR$(0)                 'INITIALIZE TO ZERO 
 +     6220 FOR Q=4 TO 131 
 +     6230   CRCH1=ASC(LEFT$(CRC$,1))           'CRC >> 8 AND 255 
 +     6240   CRCL2=CVI(CHR$(0)+RIGHT$(CRC$,1))  'CRC << 8 AND 255 
 +     6250   CRC1$=MKI$(CRCTB(CRCH1 XOR ASC(MID$(V$,Q,1))) XOR CRCL2) 
 +     6260   CRC$=RIGHT$(CRC1$,1)+LEFT$(CRC1$,1) 'SET IT BACK! 
 +     6270 NEXT Q 
 +     6280 IF CRC$ <> MID$(V$,N,2) THEN ....... 'GOTO ERROR ROUTINE 
 +     6290 REM * END OF CRC CALC 
 + 
 +     9000 FOR I%=0 TO 255 ' INITIALIZE CRC TABLE 
 +     9010   READ CRCTB(I%) 
 +     9020 NEXT I% 
 +     9025 RETURN 
 +     9030 DATA 0, 4129, 8258, 12387, 16516, 20645, 24774, 28903 
 +     9040 DATA -32504,-28375,-24246,-20117,-15988,-11859,-7730,-3601 
 +     9050 DATA 4657, 528, 12915, 8786, 21173, 17044, 29431, 25302 
 +     9060 DATA -27847,-31976,-19589,-23718,-11331,-15460,-3073,-7202 
 +     9070 DATA 9314, 13379, 1056, 5121, 25830, 29895, 17572, 21637 
 +     9080 DATA -23190,-19125,-31448,-27383,-6674,-2609,-14932,-10867 
 +     9090 DATA 13907, 9842, 5649, 1584, 30423, 26358, 22165, 18100 
 +     9100 DATA -18597,-22662,-26855,-30920,-2081,-6146,-10339,-14404 
 +     9110 DATA 18628, 22757, 26758, 30887, 2112, 6241, 10242, 14371 
 +     9120 DATA -13876,-9747,-5746,-1617,-30392,-26263,-22262,-18133 
 +     9130 DATA 23285, 19156, 31415, 27286, 6769, 2640, 14899, 10770 
 +     9140 DATA -9219,-13348,-1089,-5218,-25735,-29864,-17605,-21734 
 +     9150 DATA 27814, 31879, 19684, 23749, 11298, 15363, 3168, 7233 
 +     9160 DATA -4690,-625,-12820,-8755,-21206,-17141,-29336,-25271 
 +     9170 DATA 32407, 28342, 24277, 20212, 15891, 11826, 7761, 3696 
 +     9180 DATA -97,-4162,-8227,-12292,-16613,-20678,-24743,-28808 
 +     9190 DATA -28280,-32343,-20022,-24085,-12020,-16083,-3762,-7825 
 +     9200 DATA 4224, 161, 12482, 8419, 20484, 16421, 28742, 24679 
 +     9210 DATA -31815,-27752,-23557,-19494,-15555,-11492,-7297,-3234 
 +     9300 DATA 689, 4752, 8947, 13010, 16949, 21012, 25207, 29270 
 +     9310 DATA -18966,-23093,-27224,-31351,-2706,-6833,-10964,-15091 
 +     9320 DATA 13538, 9411, 5280, 1153, 29798, 25671, 21540, 17413 
 +     9330 DATA -22565,-18438,-30823,-26696,-6305,-2178,-14563,-10436 
 +     9340 DATA 9939, 14066, 1681, 5808, 26199, 30326, 17941, 22068 
 +     9350 DATA -9908,-13971,-1778,-5841,-26168,-30231,-18038,-22101 
 +     9360 DATA 22596, 18533, 30726, 26663, 6336, 2273, 14466, 10403 
 +     9370 DATA -13443,-9380,-5313,-1250,-29703,-25640,-21573,-17510 
 +     9380 DATA 19061, 23124, 27191, 31254, 2801, 6864, 10931, 14994 
 +     9390 DATA -722,-4849,-8852,-12979,-16982,-21109,-25112,-29239 
 +     9400 DATA 31782, 27655, 23652, 19525, 15522, 11395, 7392, 3265 
 +     9410 DATA -4321,-194,-12451,-8324,-20581,-16454,-28711,-24584 
 +     9420 DATA 28183, 32310, 20053, 24180, 11923, 16050, 3793, 7920 
 +</code> 
 +This method uses 128 * 6 BASIC statements per Xmodem packet or a 
 +miserly 768 BASIC statements per packet.  And, if you want, the 
 +code can be tightened still more.  Unfortunately, any further 
 +tightening that we could see would eliminate most of the already 
 +limited readability of the code. 
 +  
 +===== Notes and Comments ===== 
 + 
 +Please add your notes and comments here or send them to me and I'll get 
 +them added to the current copy on People/Link. 
 + 
 +  - This was originally set up to ADD 32 to the character on transmit                    and SUBTRACT 32 on receive.  By using exclusive or with 64, the                    logic is the same on transmit and receive. 
 +  - The use of the SYN character was added at the request of several                    people who have coded Xmodem routines and have struggled valiantly                    to improve their error recovery routines.  Peter Boswell 6/10/86 
 +  - The suggestion that ACK[sequence] be sent for every block received                    was added.          Peter Boswell       6/10/86 
 +  - The original value for the ACK/NAK timeout was 10 seconds.  This                    was changed to 15 seconds the situation where the receiver is                    operating at 300 baud and using X-Off to stop receipt of characters                    during disk I/O.  Peter Boswell, 6/10/86 
 +  
 +XMODEM and its derivatives have become the primary method for file 
 +transfer for personal computers and is a popular error recovery type 
 +protocol. Before learning more about Xmodem, it is important to hear 
 +what its author has to say: 
 + 
 +      "It was a quick hack I threw together, very unplanned (like 
 +      everything I do), to satisfy a personal need to communicate 
 +      with some other people.  ONLY the fact that it was done in 
 +      8/77, and that I put it in the public domain immediately, 
 +      made it become the standard that it is"....."People who 
 +      suggest I make SIGNIFICANT changes to the protocol, such as 
 +      'full duplex', 'multiple outstanding blocks', 'multiple 
 +      destinations', etc etc don't understand that the incredible 
 +      simplicity of the protocol is one of the reasons it survived 
 +      to this day in as many machines and programs as it may be 
 +      found in!" 
 + 
 +Ward Christensen, quoted from a message posted on CompuServe 
 +in 1985.  Edited by Chuck Forsberg, "X/Ymodem Protocol 
 +Reference", unpublished, 10/20/1985. 
 + 
 +The protocol is Asynchronous, 8 data bits, no parity bit, one stop bit
  
 ===== See Also ===== ===== See Also =====
Line 6: Line 890:
  
 {{tag>xmodem}} {{tag>xmodem}}
 +
 +
 +
 +
 +
 +
  
ref/xmodem.1267751775.txt · Last modified: 2010/03/04 17:16 by digitalman
Back to top
CC Attribution 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0