| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| faq:tcpip [2020/04/14 19:22] – Re-wording the FTP-HTML stuff and adder link (re: FireFox) digital man | faq:tcpip [2020/06/01 21:33] (current) – [Rebind] TIME WAIT or CLOSE WAIT - both are indications of the same problem digital man |
|---|
| |
| This usually means you have another TCP/IP server on your system that is already bound to (and is presumably already listening for incoming connections on) this port. This could be a pre-existing instance of Synchronet or any other Telnet/Web/Mail/FTP servers that you may have installed on your system. You can use utilities such as ''[[man>netstat]]'' (for Windows or Unix((e.g. 'netstat -naptu' as root user on Linux))) or [[http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx|TCPView]] (for Windows) to verify what programs (if any) have the TCP or UDP port in question already bound. If these utilities do not report any program is bound to (and listening) on this port, you can try Telnetting to the port in question and see if anything answers. If you're unable to connect to the port with a Telnet client and Synchronet cannot bind the port, your TCP/IP stack probably needs to be reset, so a system reboot may be in order. | This usually means you have another TCP/IP server on your system that is already bound to (and is presumably already listening for incoming connections on) this port. This could be a pre-existing instance of Synchronet or any other Telnet/Web/Mail/FTP servers that you may have installed on your system. You can use utilities such as ''[[man>netstat]]'' (for Windows or Unix((e.g. 'netstat -naptu' as root user on Linux))) or [[http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx|TCPView]] (for Windows) to verify what programs (if any) have the TCP or UDP port in question already bound. If these utilities do not report any program is bound to (and listening) on this port, you can try Telnetting to the port in question and see if anything answers. If you're unable to connect to the port with a Telnet client and Synchronet cannot bind the port, your TCP/IP stack probably needs to be reset, so a system reboot may be in order. |
| |
| If you're running a Unix-like operating system (not Windows) and get bind errors only when recycling servers, this is most likely because a TCP session is stuck in a ''TCP TIMEWAIT'' state (you can use ''[[man>netstat]]'' to verify this). The session will eventually time-out and close properly on its own, allowing the port to be re-bound at that time. To work-around this problem, you can either increase the ''BindRetryCount'' and/or ''BindRetryDelay'' values in your ''[[dir:ctrl]]/[[config:sbbs.ini]]'' file, or you can add the following line to your ''[[dir:ctrl]]/[[config:sockopts.ini]]'' file: | |
| REUSEADDR=1 | |
| |
| :!: **Answer:**\\ | :!: **Answer:**\\ |
| |
| Error ''13'' means "access denied". | Error ''13'' means "access denied". |
| This error upon binding usually means that you're running Synchronet as non-privileged user account (e.g. not 'root') and the operating system you're running does not allow processes run under non-privileged user accounts to bind to low (TCP or UDP) port numbers (usually less than 1024). You can either use higher TCP port numbers in your configuration or have Synchronet switch to a non-privileged user *after* binding the TCP ports (see [[config:nix]] for details). | This error upon binding usually means that you're running Synchronet as non-privileged user account (e.g. not 'root') and the operating system you're running does not allow processes run under non-privileged user accounts to bind to low (TCP or UDP) port numbers (usually less than 1024). You can either use higher TCP port numbers in your configuration or have Synchronet switch to a non-privileged user *after* binding the TCP ports (see [[config:nix]] for details), see also: [[howto:Linux non-root]]. |
| | |
| | ==== Rebind ==== |
| | :!: **Answer:**\\ |
| | If you're running a Unix-like operating system (not Windows) and get bind errors //only// when recycling servers: |
| | sbbs: term 0001 !ERROR 98 binding Telnet Server socket to port 23 |
| | sbbs: term 0001 Will retry in 15 seconds (1 of 2) |
| | |
| | ... this is most likely because a TCP session is stuck in a TCP "TIME WAIT" or "CLOSE WAIT" state (you can use ''[[man>netstat]]'' to verify this). The session will eventually time-out and close properly on its own, allowing the port to be re-bound at that time. To work-around this problem, you can either increase the ''BindRetryCount'' and/or ''BindRetryDelay'' values in your ''[[dir:ctrl]]/[[config:sbbs.ini]]'' file, or you can add the following line to the root section of your ''[[dir:ctrl]]/[[config:sockopts.ini]]'' file: |
| | REUSEADDR=1 |
| |
| ===== Bandwidth ===== | ===== Bandwidth ===== |
